Should I install a new condensing boiler in London Environment and climate change are issues of today. We all have a duty to look at how we can reduce our carbon footprint and its impact on the environment. In Central London Plumbers we are committed to apply our understanding of the energy efficiency of heating and if possible give advice on the use of renewable energy solutions.
Most homes use gas for heating boilers London premises and their need for heating water. The need to generate the highest efficiency has never been more important. The seasonal efficiency of domestic boilers in the UK (SEDBUK) is a scoring system where a minimum 90% efficiency is an "A Note" and is now a requirement under Part L of building regulations .
The payback period for energy costs vs.capital can be as little as 7 years.
We also have a duty to propose measures to minimize the heat lost through air infiltration from outside and better insulation properties of building materials
Considerations and guide:
General
It is necessary to understand requirements, expectations and limitations when trying to find the right boiler for the existing system or a new boiler installation in London . This can be achieved by interviews with a gas (Corgi) registered engineer on what may be appropriate.
Energy efficiency
The recent introduction of condensing boilers - which became mandatory since March 2005, in domestic dwellings made the decision whether or not to use a condensing boiler or condensing boiler is no longer a problem to consider.
The choice of fuel
There are some fuel choice depending on your location as follows: -
Natural Gas - Cities
LPG (bottled gas) - Rural
- Fuel oil rural
Solid Fuel - Rural
Electricity - All
NB. This is only a quick guide and there will be exceptions to the foregoing.
Heating
Consider which rooms or areas must be heated and at what temperature and time. It is also necessary to consider how an existing system performs. Systems that are based on certain structures more than others. An example of this is to open spaces, high ceilings and high rates of natural ventilation systems can be adapted to heating the ground.
Boiler
Type of boiler: -
conventional boiler (open vented)
Boiler system (without ventilation)
combination boiler (not ventilated)
The choice of a combination boiler not to be confused with a condensing boiler, so you are able to have a condensing boiler combination.
There are many factories that supply boilers at different prices. Suggest using whatever you can afford and remember the adage you get what you pay for.
A short list of manufactures:
Boilers Worcester-Bosch
Vaillant
Potterton Boilers
Keston Boilers
Hot water storage
When a conventional boiler or furnace system is installed over a storage tank or hot water cylinder is required to provide hot water. This is opposed to a wall-hung boiler that provides hot water instantly without having to store hot water.
Piping
Typically the material used for the DISTRIBUTIONS.
Posted on July 27, 2010.