Portable Air Conditioner

Hi all,

I bought a portable air conditioner that has a window kit (I rent, can not cut holes in walls, etc.). The problem I have is that the only "window" in my room is actually two doors. I can keep a closed and open one, but have no idea how to close the opening to stop the hot air to enter. Would LOVE some advice.

You would have to install a solid wood door with a temporary hole in it to drive A / C and build a ledge for him to sit on this secure. Some copy centers damaged doors at prices below ... you need to find one to match the size of the existing door. A / C water discharge units that are collected from the room so that you will find a way to leak out even if it is not placed on an outside wall. You may be better to place the unit A / C in the near the window and pointing a fan to your room to get fresh air to it.

You can use the kit door or window for ventilation mechanism ...... Flag

Looks like you have the same air that we have. Standing free and can be moved from room to room. If this is true, you should also have a kit door kit window.

The kit is to be a patio door. I try to imagine how this door kit () would be consistent with two doors. We did not use the door kit, but are patio doors in the room.

If the air conditioner is the same as what we have, go to the store where purchased and ask them door kit and should have been included. At the same time, ask how to install the two doors.

Kit is not going from floor to ceiling. Maybe if you open the door and one sliding door kit between the two doors. and will be held in place by the two doors.

Ask questions mentioned above and you bought your problem can be solved.

Good Luck