Split Unit

I am working on a report on how college works a split unit air conditioner unit works .. so .. I need to get more information about how it works.

Mr. Slim is a mixed system ductless air conditioning. If you're familiar with a central system, you have the basic idea of what a system breakdown is as follows: an outdoor condensing unit and an evaporator inside. The fundamental difference between the two is that the central system of the evaporator is usually found in the attic and led to the bifurcated parts of your house. With Mr. Slim the evaporator is actually in the room being air conditioned. The indoor unit is a quiet fan that blows across a coil of aluminum cold air-conditioning mode. The indoor unit is usually a type of wall, and this unit is connected directly to the outdoor unit by copper tubing and control and power wiring. In the outdoor unit, compressor refrigeration cycles and indoor and outdoor, and ambient air is cooled or heated depending on the direction of refrigerant flow between the two.

More detailed explanations:
Mr. Slim uses the same mechanical components that any system based on interactions with air conditioning because the evaporation process to occur. Mr. Slim is a ductless split model, which simply means the indoor unit is separated from the outdoor unit is connected by a gas and a liquid line refrigerant. The outdoor unit is considered the warm side during the process of air conditioning. Unit on the cold side is inside. In the process of heating the compressor reverses this operation and the heat is evaporated in the outdoor unit. Then, the indoor unit collects this energy to heat while the fan blows air on the indoor coil and distributes warm air throughout the room.

Air Conditioning Basics:
The cooling process is dictated by simple physics. Due to the heat of evaporation is absorbed by the fan-coil of aluminum in the evaporator inside and left the room by the refrigerant gas. The heated refrigerant (pressure compressor) flows into the unit coils aluminum outdoor. Here is a big fan blowing in the coil to discharge the thermal energy. The liquid refrigerant is cooled by this process and cycle to the indoor unit where a fan blows across it and distributes fresh air throughout the room.

Most air conditioning systems have four mechanical components:
1. compressor
2. an expansion valve or metering device
3. evaporator
4. blower
5. chemical refrigerant